NanoSky Urgent Communiqué

+++ Press release: NanoSky Fire Protect used as coolant +++

On 19.03.2011, following a TV report, a series of tests were carried out using NanoSky Fire Protect. An iron plate heated to 750°C was initially sprayed with water, and then in later tests with NanoSky Fire Protect.

While the cooling tests with water – at intervals of 10, 20 and 30 seconds – exhibited barely any or very little effect, the tests with NanoSky Fire Protect achieved a significant result.

 

After just 30 seconds, the heat had been reduced by more than 50%. The test results confirm that cooling materials with NanoSky Fire Protect is more likely to bring success than the same efforts using just water.

 

 

Attempts at putting out the fire with water after 10, 20 and 30 seconds:

Attempts at putting out the fire with NanoSky Fire Protect after 10, 20 and 30 seconds: